Stock Stories: 1952 Triumph Thunderbird
Martin Squires
23 October 2020
Martin Squires
With custom bike culture exploding in recent years, the history and
importance of the two-wheeled machines that first rolled off of the
production line are often overlooked. Stock Stories tells the tales of
these motorcycles.
By
1949, Triumph viewed the United States as a very important market. Sales
of the Speed Twin had already demonstrated that there was demand for
lighter-weight machines—lighter, at least, than the typical large twins
that Americans were used to. However, the main question about the Speed
Twin was its capability on longer stretches of road that were typically
encountered in North America.
The Thunderbird rises
Triumph’s T100 motor, bored out to 650cc spec. Martin
Squires
Edward
Turner, General Manager and Chief Designer at Triumph, had made several
trips to the U.S. after WWII, where he received just this feedback. The
Speed Twin was light, and just as fast as the bigger native motorcycles,
but for longer journeys a 500cc capacity just wasn’t enough. In typical
Turner thinking, he looked at what engineering solutions were possible
with resources Triumph already had. (Using existing stock and marketing
it as a new product was key to keeping costs and development time down.)
Boring out the T100 engine out to 649 looked like the best solution,
which was perfectly feasible without compromising the integrity of the
barrel.
With
the development of this new powerful long hauler underway, Turner was
looking at how best to market this new machine in the United States.
Legend has it that he was inspired by the Thunderbird Motel in Florence,
South Carolina. The indigenous iconography of a supernatural bird
associated with power and strength seemed like perfect name to ignite
the imagination of American motorcycle riders.
The Thunderbird Motel, Florence, South
Carolina. Martin
Squires
Once
the development had come to a head, Triumph needed to prove that the
Thunderbird could cover long distances at high speed. With the
Brooklands track no longer operating, Triumph looked to Montlhéry just
outside of Paris as a testing ground. Not only were three Thunderbird
prototypes run at the banked track as a publicity stunt, but they were
ridden from the Meriden works outside of Birmingham, U.K., to the
track and back. At Montlhéry, the three Triumphs all covered 500 miles
at an average of 90+mph with the bikes roaring up to the iconic
“ton”—100 mph—on the final lap.
Thunderbird prototype laps Montlhéry at 90 mph. Martin
Squires
From
its launch in 1950, with the T6 model denoting a 650cc capacity, the
Thunderbird was a great success. It resoundingly achieved its goal of
light weight, high speed, and long-distance usability. For this reason,
it was used by police departments worldwide, and in the U.K. it was
known to law enforcement as a SAINT (Stop Anything in No Time). Again,
for the same reason, the Thunderbird became popular with the famous
Ton-Up Boys.
In the
film The
Wild One (1953), Marlon Brando rode a Thunderbird as the
rebel rousing gang leader Johnny Strabler. This iconic image brought the
motorcycle to the attention of a younger, more style-conscious audience.
At the time Triumph didn’t want to be associated with the film, not
surprising given that it was banned in the U.K. for 14 years. Once
Triumph realized the pulling power of Brando, it capitalized by issuing
an all-black version that became known as the Blackbird.
Ironically, by the time the film was finally granted an X-rated
certificate, the Thunderbird no longer held the appeal it once did at
its outset. Later stylings had turned it to a more commuter-savvy
machine. By the late 1950s changes were made to the bodywork to include
fully valanced fenders and “bathtub” bodywork, enclosing the rear wheel.
These made sense to the British rider who rode often in the rain,
whereas the American market had no practical need for such changes. With
this less-sporty look, the Thunderbird fell out of fashion. American
dealers were ordering more Triumph Bonnevilles, stripping off the fuller
body headlight and fenders and replacing them with TR6 versions in order
to keep the more aggressive styling.
The
Thunderbird would continue to be made up until 1966 with the new Unit
construction engine being used from 1963. During this time, it would
always be overlooked by customers in favor of the new Bonneville. It is
important to remember that the Thunderbird was the first 650cc Triumph
to satisfy the American market and paved the way for later models in
styling, performance and marketing.
The instrument “Nacelle”
Martin Squires
Designed in order to group all the instruments in a visible and usable
position. All the instruments are rubber-mounted on the streamlined
panel, making them easier to clean and maintain.
The SU carb
Martin Squires
One of
the distinguishing things about the 1952 variant is that Triumph decided
to switch to an SU MC2 carburetor, chosen for its fuel economy and
smooth acceleration. The MC2 was devoid of the power surge present in
the Amal Monobloc. The delivery of mixture and resultant power was
smooth and constant throughout acceleration.
In
order to link the carb to the air filter, a donut shaped lug was
incorporated into the down tube, through which the connecting tube
passes. This lug distinguishes the Thunderbirds built between 1952 and
1955 from all other years.
Setup
of the SU carbs was something that couldn’t be done by staff from the
Triumph works; a dedicated SU tuner (Jock West in this case) would have
to be hired to come to the factory and tune the carburetors one by one
before the Thunderbirds could leave the factory. Ultimately, the
necessary expense of this situation proved one of the reasons why
Triumph didn’t continue with the MC2.
The sprung hub
Martin Squires
Turner
started working on the sprung hub design in 1938, his intention was to
design a simple low-weight and low-cost solution to rear suspension.
Inspired by the hub suspension in the Gloster Gladiator made by Dowty,
Turner designed a small plunger-type suspension with 2 inches of travel
to fit within the rear hub.
The
war delayed integration of the hub, originally intended for the 1940s
Triumphs, until 1946. A Mark 2 version was introduced in 1951. The
sprung hub would be Triumph’s only rear suspension offered for its
parallel-twin models up until 1955. Other than adding some rear shock
absorption, the sprung hub made it easier to incorporate rear suspension
into existing rigid frames and offered an aftermarket choice for
existing customers. Turner, clearly, was very in tune with how business
was done for profit.
Taking
apart a sprung hub is notoriously dangerous due to the compressed
springs, and it even has a warning cast into the housing. Mark 1 hubs
had a grease nipple but the Mark 2 was built without, as the factory
grease was rated for 20,000 miles. Restorers: Beware when taking that
hub apart!
Martin Squires is a bike-obsessed and U.K.-based artist. Check out his Facebook, Instagram,
and website.
Copyright © 2000 NTNOA All rights reserved.
Revised: October 28, 2020.
|